产品资料

Proposal specification

如果您对该产品感兴趣的话,可以
产品名称: Proposal specification
产品型号:
产品展商: 其它品牌
产品文档: 无相关文档

简单介绍

■Hardware Item Remark 1 Test current DC1.1A±0.1A 2 Test duration 1.0sec±0.05sec 3 Meas.channels 32CH(16CH/Board×2) *Max. 64CH(16CH/Board×4) 4 Sampling rate 1024Hz ■Software Item Remark 1 Graph Data display Y axis:Cycle,X axis:mΩ Temp. Data (optional) 2 Meas. Delay After detected hot status 15/20/25(min) (refer to next page ①)


Proposal specification  的详细介绍

①Measurement Delay
This function inserts a delay time before starting measurement after hot status contact from
chamber is detected. It is able to select from 15min, 20min or 25min.

②Data sampling time

This is a function to set the sampling time during current impression. It is able to select from
0.1sec or 0.9sec.
■in case of 0.1sec
A Measurement data is generated by averaging process using each sampling data during 0.1sec
shown in below figure.

■in case of 0.9sec
A Measurement data is generated by averaging process using each sampling data 

during 0.9sec
shown in below figure.

③Scan speed
The measurement starts after delay time when hot contact from chamber is detected.
This measurement system can finish measurement of 32 channels in less than 40sec.


产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

苏公网安备 32050602010439号